http://repositorio2.unb.br/jspui/handle/10482/48157
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
ARTIGO_ApplicationBridgeInformation.pdf | 37,59 MB | Adobe PDF | Visualizar/Abrir |
Título : | Application of bridge information modelling using laser scanning for static and dynamic analysis with concrete damage plasticity |
Autor : | Silva, Welington Vital da Silva, Ramon Saleno Yure Rubim Costa Morais, Marcus Vinícius Girão de Emidio Sobrinho, Brunno Pereira, Rodrigo Evangelista Júnior, Francisco |
metadata.dc.contributor.affiliation: | University of Brasilia, Department of Civil and Environmental Engineering, Graduation Program in Structural Engineering University of Brasilia, Department of Civil and Environmental Engineering, Graduation Program in Structural Engineering University of Brasilia, Department of Mechanical Engineering University of Brasilia, Department of Civil and Environmental Engineering, Graduation Program in Structural Engineering University State of Minas Gerais, Department of Civil Engineering University of Brasilia, Department of Civil and Environmental Engineering, Graduation Program in Structural Engineering |
Assunto:: | Pontes Concreto Fotogrametria |
Fecha de publicación : | 2023 |
Editorial : | Elsevier BV on behalf of Faculty of Engineering, Alexandria University. |
Citación : | VITAL, Welington et al. Application of bridge information modelling using laser scanning for static and dynamic analysis with concrete damage plasticity. Alexandria Engineering Journal, [S. l.], v. 79, p. 608-628, 15 set. 2023. DOI: https://doi.org/10.1016/j.aej.2023.08.023. Disponível em: https://www.sciencedirect.com/science/article/pii/S1110016823007044?via%3Dihub. Acesso em: 04 jun. 2024. |
Abstract: | A new proposal has been applied using Bridge Information Modeling associated to Terrestrial Laser Scanning TLS and photogrammetry to obtain the digital model of an existing bridge. For the laser scanning process. Thus, it was also possible to identify the pathologies and damages in the concrete of the bridge. Furthermore, it was shown how geo-information with remote sensing using the station Trimble SX 10 can be applied in area of bridge projects with less time and lower cost, in relationship to a conventional survey Asbuilt with manual survey in field. One of the innovations of this paper was to obtain the digital model of the bridge by integration of TLS and photogrammetry to obtain the 3D digital model. The new methodology consisted of acquisition of the bridge scenes through points previously implanted, making the polygonal contour of the entire bridge. Furthermore, the execution of the field survey from georeferenced points to capture the scenes during the sweep with TLS facil itated the refinement and, consequently, it was possible to obtain the digital model with the concrete damage. It was also possible to perform a complex nonlinear analysis with Finite Element with the digital model of the bridge. Therefore, it was applied a reverse analysis of the strength of the structure using the Concrete Damage Plasticity Model using ABAQUS software. Two numerical analyses were performed on the bridge; one consid ering only the static behavior of the bridge and another considering the dynamic behavior. In the static analysis, the behavior of the dapped-end beam of the bridge, was investigated. On the other hand, in the dynamic evaluation, the natural frequency and damping ratio for bridges with Dapped-end beams was obtained in ABAQUS through Rayleigh damping and compared with the technical literature, which presented satisfactory results. |
metadata.dc.description.unidade: | Faculdade de Tecnologia (FT) Departamento de Engenharia Civil e Ambiental (FT ENC) Departamento de Engenharia Mecânica (FT ENM) |
Licença:: | This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). |
DOI: | https://doi.org/10.1016/j.aej.2023.08.023 |
Aparece en las colecciones: | Artigos publicados em periódicos e afins |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.