Título :	Experimental and numerical study of the flammability limits in a CH4/O2 torch ignition system
Autor :	Shynkarenko, Olexiy Simone, Domenico Lee, Jungpyo Bertoldi, Artur Elias de Morais
metadata.dc.contributor.email:	mailto:olexiy@aerospace.unb.br mailto:domenico.simone@aerospace.unb.br mailto:jpleerocket@gmail.com mailto:bertoldi@unb.br
metadata.dc.identifier.orcid:	https://orcid.org/0000-0002-2934-1795 https://orcid.org/0000-0002-4105-6700 https://orcid.org/0000-0002-7527-1425 https://orcid.org/0000-0002-7080-734X
Assunto::	Sistema de ignição Inflamabilidade Câmara de combustão
Fecha de publicación :	24-may-2022
Editorial :	MDPI
Citación :	SHYNKARENKO, Olexiy et. al. Experimental and numerical study of the flammability limits in a CH4/O2 torch ignition system. Energies, Basel, v. 15, n. 11, art. 3857, 2022. DOI 10.3390/en15113857. Disponível em: https://www.mdpi.com/1996-1073/15/11/3857. Acesso em: 22 nov. 2022.
Abstract:	The current work is devoted to studying combustion initiation inside the methane-oxygen torch igniter for a hybrid rocket motor. The ignition system can generate a wide range of power and oxidizer-to-fuel ratios. It has a self-cooled vortex combustion chamber with one fuel jet injector and one circumferential vortex oxidizer injector. The system adjusts the mass flow rates of the propellants through the control valves and organizes cooling of the wall and flame stabilization. Experimental analysis of the ignition limits was investigated on the laboratory test bench. The propellants’ pressure and mass-flow rates, combustion temperature, ignition delay, and spark frequency were controlled during the tests. The authors executed a series of tests with different propellants’ mass flow rates. As a result, the region of stable ignition was found as well as the regions of ignition failure or unreliable ignition. A previously validated numerical model was used to analyze the flow in the reliable ignition region and the ignition failures region. Several numerical simulations of the transient three-dimensional chemically reacting flow were implemented. Consequently, the ignition delay and the thermal impact on the combustion chamber wall were determined numerically. Results of the simulations were compared with theoretical and experimental data showing good correspondence.
metadata.dc.description.unidade:	Faculdade UnB Gama (FGA)
Licença::	© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). Fonte: https://www.mdpi.com/1996-1073/15/11/3857. Acesso em: 22 nov. 2022.
DOI:	https://doi.org/10.3390/en15113857
Aparece en las colecciones:	Artigos publicados em periódicos e afins

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.