Título :	A low-cost filament winding technology for university laboratories and startups
Autor :	Andrianov, Artem Tomita, Erika Kamada Veras, Carlos Alberto Gurgel Telles, Bruno
metadata.dc.identifier.orcid:	https://orcid.org/0000-0002-3987-6267 https://orcid.org/0000-0002-9668-953X
Assunto::	Enrolamento filamentar Trajetória sinuosa Invólucro composto Polímeros
Fecha de publicación :	7-mar-2022
Editorial :	MDPI
Citación :	ANDRIANOV, Artem et al. A low-cost filament winding technology for university laboratories and startups. Polymers, v. 14, n. 5, 1066, 2022. DOI: https://doi.org/10.3390/polym14051066. Disponível em: https://www.mdpi.com/2073-4360/14/5/1066/htm. Acesso em: 01 ago. 2022.
Abstract:	This paper systematically explains the methodology and results of empirical work on the development of a low-cost filament winding technology for manufacturing axisymmetric polymer composite structures with a high length-to-diameter ratio, such as tubes, motor casings, and pressure vessels. The principal objective was to examine the experiences and most optimal practices in the development of computer-controlled equipment and auxiliary tooling for the wet filament-winding process. To preclude expensive commercial software for the automated control of a winding machine, analytical equations were derived for the winding trajectory of a four-axis filament-winding machine. The feasibility of the proposed equations was successfully validated by laying the fiber along the geodesic path marked on the surface of a cylindrical mandrel with hemispherical ends. Moreover, the carbon/epoxy cylindrical casings with hemispherical ends and port openings of the same diameter were wound to determine the thickness distribution in the hemispherical dome. The fiber volume ratio in the wound composite parts was evaluated using an optical technique.
metadata.dc.description.unidade:	Faculdade UnB Gama (FGA)
Licença::	Copyright: © 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).
DOI:	https://doi.org/10.3390/polym14051066
Aparece en las colecciones:	Artigos publicados em periódicos e afins

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.